Coolant Level Check on a 2018 Jeep Wrangler JK Unlimited Sahara 3.6L V6

Jeep Wrangler JK Model Years - 2018

Coolant reservoir location to see if your coolant level is low

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2018 Jeep Wrangler JK Unlimited Sahara 3.6L V6 Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2018 Jeep Wrangler JK Unlimited Sahara 3.6L V6 Clock Set Clock

Is the clock in your car ahead or behind? Learn how to set it here!

2018 Jeep Wrangler JK Unlimited Sahara 3.6L V6 Coolant (Antifreeze) Flush Coolant

Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!

2018 Jeep Wrangler JK Unlimited Sahara 3.6L V6 Fuse (Interior) Check

Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Checking the engine coolant (also known as antifreeze) level in your 2018 Jeep Wrangler JK is pretty easy. In order to get an accurate reading, your 3.6 liter engine should be cool to the touch when you check it. Engine coolant / antifreeze circulates through your engine to keep it cool in the summer but won't freeze in the winter. The video above shows you where the coolant reservoir in your Wrangler JK is located and how to check the coolant / antifreeze level. If you need to add anti-freeze, be sure to check your owners manual to determine the correct type of coolant to add - in Jeeps, it usually located in a section titled Fluid Capacities towards the end of your manual. See our video on how to add engine coolant for tips on adding coolant to your Wrangler JK.

Always wear safety goggles when working on your Wrangler JK. Taking off the coolant reservoir cap on a warm engine could cause the cap to up explosively and fluid to spray out of the reservoir. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Wrangler JK for head gasket leakage.

  • Advance Auto coupon for
    20% off entire order: KIOSK20