David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2001 Chrysler LHS. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your LHS's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your LHS is relatively easy - turn your hazard lights on and check the front of your LHS and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your LHS, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
A/C blowing hot air?2012 Chrysler 300 Limited 3.6L V6
If you have an electrical component that doesn't work, try replacing the fuse first2001 Chrysler LHS 3.5L V6
There's no reason to check the washer fluid level without adding some - see how to do it here!2001 Chrysler LHS 3.5L V6
Help keep your car as responsive as you are by maintaining proper power steering fluid levels2001 Chrysler LHS 3.5L V6
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2001 Chrysler LHS 3.5L V6