Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2005 Mercury Sable. Before adding oil to your Sable, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Sable has a low oil level. For most Mercurys, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Sable, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Sable and how to add oil. Adding too much oil to your Sable can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Sable, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak2005 Mercury Sable GS 3.0L V6 Sedan
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2005 Mercury Sable GS 3.0L V6 Sedan
White light when you back up - yup, they burn out and you can replace them with bright LEDs2005 Mercury Sable GS 3.0L V6 Sedan
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2005 Mercury Sable GS 3.0L V6 Sedan
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2005 Mercury Sable GS 3.0L V6 Sedan
There's no reason to check the washer fluid level without adding some - see how to do it here!2005 Mercury Sable GS 3.0L V6 Sedan