EN
Parts & Tools Parts & Tools
Mechanics Mechanics
Gear Guide Gear Guide
search

Coolant Flush How-to: Mercury Milan (2006-2011)

Rosen Nissan helped make these videos

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.

 
Video Description

Adding engine coolant (also known as antifreeze) to your 2006 Mercury Milan is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won't freeze in the winter. Make sure to check your engine when it is cold for an accurate reading. The video above shows you where the coolant reservoir in your Milan is located and how to add coolant. Be sure to check your owners manual to determine the correct type of fluid to add - for Mercurys, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water. Some coolants will come premixed...that is, you don't need to add any water. These coolants will typically say 50/50 or pre-mixed on the front of the coolant bottle.

Removing the coolant reservoir cap on a warm engine could cause the cap to fly off at a high rate of speed and fluid to spray out of the reservoir. Always wear safety goggles when working on your Milan. Promptly wipe up any spilled fluid as it is highly toxic. Animals love its sweet taste, so even a spilling a small amount on your garage floor can end up in the dog's stomach pretty quickly. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Milan for head gasket leakage

Other videos you might find helpful

  • 2006 Mercury Milan Premier 3.0L V6 Tires & Wheels Check Tire Pressure
    Add air to your tires

    Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw

    2006 Mercury Milan Premier 3.0L V6
  • 2006 Mercury Milan Premier 3.0L V6 Oil Add Oil
    Top up the oil level

    Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!

    2006 Mercury Milan Premier 3.0L V6
  • 2006 Mercury Milan Premier 3.0L V6 Hoses Check Hoses
    Checking coolant hoses

    Coolant hoses wear out over time and need to be replaced - check 'em early and often

    2006 Mercury Milan Premier 3.0L V6
  • 2006 Mercury Milan Premier 3.0L V6 Fluid Leaks Power Steering Fluid (fix leaks)
    Seal minor power steering fluid leaks

    See how to seal up minor power steering fluid leaks

    2006 Mercury Milan Premier 3.0L V6
  • 2006 Mercury Milan Premier 3.0L V6 Lights Parking Light (replace bulb)
    Change the parking light

    Small bulbs that burn out regularly - did you know you can replace these with LED lights?

    2006 Mercury Milan Premier 3.0L V6
  • 2006 Mercury Milan Premier 3.0L V6 Air Filter (Cabin) Replace
    Change your cabin air filter!

    Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

    2006 Mercury Milan Premier 3.0L V6
  • See all videos for the 2006 Mercury Milan
Comments
The Right Parts
The Right Tools
coolant drain pans radiator hoses fluid pumps hose clamps gloves stop leak creepers
Similar Cars in our Video Library