David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2010 Chevrolet Malibu. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Malibu's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Malibu is relatively easy - turn your hazard lights on and check the front of your Malibu and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Malibu, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you2010 Chevrolet Malibu LT 2.4L 4 Cyl.
A/C blowing hot air?2008 Saturn Aura XE 3.5L V6
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2010 Chevrolet Malibu LT 2.4L 4 Cyl.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2010 Chevrolet Malibu LT 2.4L 4 Cyl.
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2010 Chevrolet Malibu LT 2.4L 4 Cyl.
Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year2010 Chevrolet Malibu LT 2.4L 4 Cyl.