How to Add Refrigerant to a 2010 Mercury Milan Premier 3.0L V6 FlexFuel

Mercury Milan Model Years - 2006, 2007, 2008, 2009, 2010, 2011

Where the low pressure A/C port is on 2010 Milan and how to add add freon

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2010 Mazda 6 S 3.7L V6 Bluetooth Pair Phone

Driving with your phone pressed against your ear is illegal in many places. See how to talk hands free!

2006 Mercury Milan Premier 3.0L V6 Battery Clean Battery & Terminals

If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner

2006 Mercury Milan Premier 3.0L V6 Lights Fog Light (replace bulb)

Don't be caught in the fog with burnt out fog light bulbs

2006 Mercury Milan Premier 3.0L V6 Windshield Washer Fluid Add Fluid

One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

When the air conditioner in your 2010 Mercury Milan starts blowing hot air, you likely have a freon leak. Recharging the freon in your AC system is an inexpensive and easy first step to restoring the cooling capacity of your A/C system. Most refrigerants include a leak sealer that will seal small leaks in addition to filling the R134a freon. The A/C system in your Milan consists of a compressor that is belt-driven, an evaporator and freon. If there is a problem with your compressor or evaporator, adding freon will not restore cooling.

How do you recharge AC in a 2010 Mercury Milan? The low side AC port location is the first thing to find when you are looking for how to put freon in a car. Once you find the 2010 Milan AC low pressure port cap, hook up the can of refrigerant to the low pressure port. When your compressor kicks on, add freon to the correct pressure. In addition to cooling, freon lubricates the compressor when it runs. Typically the AC recharge kit you buy will have enough capacity to add enough freon to get the AC in your Milan to blow cold air.

What type of refrigerant does a 2010 Mercury Milan use? Air conditioning systems can vary so it is critical that you check the sticker in the engine bay to determine your Milan refrigerant type. There is an AC sticker in the engine bay of your 2010 Milan that indicates if it requires R134a refrigerant or the newer R1234YF type to do a recharge. You cannot add R1234YF refrigerant to a R134a system nor can you add R134a refrigerant to a R1234YF system. R134a and R1234YF have different low pressure port types, so you should never use a recharge adapter to add the wrong type of refrigerant. Recharging your Milan with the wrong type of freon can make the AC recharge cost much higher!

  • Advance Auto coupon for
    20% off entire order: KIOSK20