Honda City helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2010 Toyota Corolla. We recommend that you change both the driver and passenger side bulbs at the same time on your Corolla as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Corolla's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Corolla and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Corolla, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Your coolant should perform well under any condition - just like Aaron Rodgers!2010 Toyota Corolla S 1.8L 4 Cyl.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2010 Toyota Corolla S 1.8L 4 Cyl.
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2010 Toyota Corolla S 1.8L 4 Cyl.
If you have an electrical component that doesn't work, try replacing the fuse first2010 Toyota Corolla S 1.8L 4 Cyl.
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2010 Toyota Corolla S 1.8L 4 Cyl.