Intl. Autos helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2011 Ford Crown Victoria. Before adding oil to your Crown Victoria, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Crown Victoria has a low oil level. For most Fords, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Crown Victoria, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Crown Victoria and how to add oil. Adding too much oil to your Crown Victoria can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Crown Victoria, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
The burnt out tail light: classic reason for a cop to pull you over - change yours now2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
If your transmission is running low on fluid, be sure to add some - find out how to do this here!2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
Learn how to diagnose and fix minor oil leaks in your car2011 Ford Crown Victoria LX 4.6L V8 FlexFuel