David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2012 Chrysler 200. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your 200's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your 200 is relatively easy - turn your hazard lights on and check the front of your 200 and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your 200, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
A few key tips will make jacking up your car much safer2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Learn where your spare tire and jack are located before you need it on the side of the road2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Driving with your phone pressed against your ear is illegal in many places. See how to talk hands free!2015 Chrysler 200 Limited 2.4L 4 Cyl. Sedan (4 Door)
Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Your coolant should perform well under any condition - just like Aaron Rodgers!2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)