Honda City helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2012 Mitsubishi Lancer. We recommend that you change both the driver and passenger side bulbs at the same time on your Lancer as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Lancer's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Lancer and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Lancer, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
Don't be caught in the fog with burnt out fog light bulbs2006 Mitsubishi Eclipse GT 3.8L V6
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
Learn how to diagnose and fix minor oil leaks in your car2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2012 Mitsubishi Lancer SE 2.4L 4 Cyl.