Andrew Chevrolet helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2013 Ford F-150. Before adding oil to your F-150, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your F-150 has a low oil level. For most Fords, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your F-150, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your F-150 and how to add oil. Adding too much oil to your F-150 can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your F-150, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?2013 Ford F-150 XLT 3.7L V6 FlexFuel Standard Cab Pickup
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2013 Ford F-150 XLT 3.7L V6 FlexFuel Standard Cab Pickup
Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year2013 Ford F-150 XLT 3.7L V6 FlexFuel Standard Cab Pickup
Don't be the guy with your third brake light burnt out2013 Ford F-150 XLT 3.7L V6 FlexFuel Standard Cab Pickup
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2013 Ford F-150 XLT 3.7L V6 FlexFuel Standard Cab Pickup
Coolant hoses wear out over time and need to be replaced - check 'em early and often2013 Ford F-150 XLT 3.7L V6 FlexFuel Standard Cab Pickup