Coolant Flush How-to: GMC Canyon (2015-2019) SLE 2.8L 4 Cyl. Turbo Diesel Crew Cab Pickup

1. Getting Started - Prepare for the repair

2. Overview - How to determine cooling system type

3. Open the Hood - How to pop the hood and prop it open

4. Find Reservoir - Locate the coolant reservoir and clean it

5. Drain Reservoir - Remove coolant from the reservoir

6. Drain Point - Locate the drain point on the radiator

7. Drain Coolant - Drain the coolant from the system

8. Circulate Water - Run engine with distilled water and flush

9. Fill Coolant - Dilute coolant with distilled water and fill

10. Locate Hoses - Locate the coolant hoses and connection points

11. Burp System - Remove excess air in the cooling system

12. Replace Cap - Put the reservoir cap back on

13. Replace Cover - Put the cover back on underneath

14. Clean Up Tips - Secrets to dealing with spilled coolant

15. More Info. - Additional information on coolant flushes

Share on   Share on Twitter   Share on Facebook
Video Description

Adding engine coolant (also known as antifreeze) to your 2017 GMC Canyon is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won't freeze in the winter. Make sure to check your engine when it is cold for an accurate reading. The video above shows you where the coolant reservoir in your Canyon is located and how to add coolant. Be sure to check your owners manual to determine the correct type of fluid to add - for GMCs, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water. Some coolants will come premixed...that is, you don't need to add any water. These coolants will typically say 50/50 or pre-mixed on the front of the coolant bottle.

Removing the coolant reservoir cap on a warm engine could cause the cap to fly off at a high rate of speed and fluid to spray out of the reservoir. Always wear safety goggles when working on your Canyon. Promptly wipe up any spilled fluid as it is highly toxic. Animals love its sweet taste, so even a spilling a small amount on your garage floor can end up in the dog's stomach pretty quickly. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Canyon for head gasket leakage

  • Advance Auto coupon for
    20% off entire order: KIOSK20

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2017 GMC Canyon SLE 2.8L 4 Cyl. Turbo Diesel Crew Cab Pickup Hoses Check Hoses

Coolant hoses wear out over time and need to be replaced - check 'em early and often

2017 GMC Canyon SLE 2.8L 4 Cyl. Turbo Diesel Crew Cab Pickup Hoses Fix Leaks

The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you

2017 GMC Canyon SLE 2.8L 4 Cyl. Turbo Diesel Crew Cab Pickup Air Filter (Cabin) Replace

Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

2017 GMC Canyon SLE 2.8L 4 Cyl. Turbo Diesel Crew Cab Pickup Lights Fog Light (replace bulb)

Don't be caught in the fog with burnt out fog light bulbs