1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Bulb - Steps to remove a burnt out bulb
4. Helpful Hints - How to find replacement bulb type and other hints
5. Replace Bulb - Procedures to replace the new bulb
6. More Info. - Additional information on headlights
The video above shows you to replace the headlight in your 2017 GMC Canyon. Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your Canyon at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side. In some GMCs, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some GMCs have high intensity discharge headlights, sometimes referred to as xenon lights. These bulbs have a very high voltage that runs through them, even if the battery is disconnected. If your Canyon has this type of bulb, we do not recommend that you attempt to change it yourself.
When you change the headlight on your Canyon, it is important to not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb.
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car
If your car blows hot air when your air conditioner is turned on, try recharging the freon first
Burnt out brake lights increase your chance of getting rear ended - check and change yours today
If you have an electrical component that doesn't work, try replacing the fuse first