How to Add Coolant: Ford Focus (2008-2011) SE 2.0L 4 Cyl. Sedan (4 Door)

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Find Reservoir - Locate the coolant reservoir and clean it

4. Check Level - Determine the coolant level

5. Add Coolant - Determine coolant type and add fluid properly

6. Replace Cap - Secure the coolant reservoir cap

7. Locate Hoses - Locate the coolant hoses and connection points

8. Assess Hoses - Tips for how to assess the condition of the hoses

9. More Info. - Additional Information on adding Coolant

Share on   Share on Twitter   Share on Facebook
Video Description

Adding engine coolant (also known as antifreeze) to your 2009 Ford Focus is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won't freeze in the winter. Make sure to check your engine when it is cold for an accurate reading. The video above shows you where the coolant reservoir in your Focus is located and how to add coolant. Be sure to check your owners manual to determine the correct type of fluid to add - for Fords, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water. Some coolants will come premixed-that is, you don't need to add any water. These coolants will typically say 50/50 or pre-mixed on the front of the coolant bottle.

Removing the coolant reservoir cap on a warm engine could cause the cap to fly off at a high rate of speed and fluid to spray out of the reservoir. Always wear safety goggles when working on your Focus. Promptly wipe up any spilled fluid as it is highly toxic. Animals love its sweet taste, so even a spilling a small amount on your garage floor can end up in the dog's stomach pretty quickly. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Focus for head gasket leakage

  • Advance Auto coupon for
    20% off entire order: KIOSK20

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2009 Ford Focus SE 2.0L 4 Cyl. Sedan (4 Door) Lights Tail Light (replace bulb)

The burnt out tail light: classic reason for a cop to pull you over - change yours now

2009 Ford Focus SE 2.0L 4 Cyl. Sedan (4 Door) Oil Add Oil

Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!

2009 Ford Focus SE 2.0L 4 Cyl. Sedan (4 Door) Power Steering Fluid Check Fluid Level

Power steering fluid is easy to check and many people (mechanics included) often forget about - learn how here

2009 Ford Focus SE 2.0L 4 Cyl. Sedan (4 Door) Fluid Leaks Transmission Fluid (fix leaks)

Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this